111 miles on the B, aka El Tour de Tucson

El Tour de Tucson is the biggest cycling event around these parts, attracting cyclists from all over. The main event is the 111 mile race that runs around the perimeter of town. I've done this ride twice before on a road bike, but of course this year I had to do it on the B!

Let me rewind a couple of days... I was getting flats on both tires a few days before the event (even though I had Flat Attack in the tubes).  I took the rear tire off and for the life of me I couldn't get it back on.  Had to go to the LBS to get it back on with a new tube and sealant.  The front tire went back on just fine.  I also snugged up my headset at BICAS since I could feel it coming loose.

Back to race day...

First of all, the weather could not have been better!  It was overcast all day, and the morning wasn't very cold.  As usual, all the participants were cheery and ready to roll.  I arrived to the starting area around 6:00, about an hour before the start.  I chatted up with a couple of guys who flew in from Kansas City.  I was able to park the B with the rear folded until just before the start.

Parked!

The B ready and waiting and getting some stares.

Riders getting anxious.

The dudes from KC checking their phones.

Testing out Apple's new panoramic feature

Let's go already!

Before I knew it we were off and running. I didn't see any other folding bikes... I did see an unicyclist and three elliptiGO-type bikes, along with a hand full of recumbents and hand-powered cycles.  It was relatively uneventful 100 miles in... I did spontaneously find my soccer teammate about 40 miles in, then we parted ways soon after, then met up again with about 15 miles to go.

Me passing the unicyclist

I was beginning to struggle at about 10 miles from the finish.  I ran out of water in my Camelback hydration pack with about 7 miles to go.  I stopped about 5 miles to go and ate another gel, which in hindsight was a mistake because I didn't have any water to wash it down with.  Another 2 miles down the road my body (and especially my arms) were getting severely tingly and numb...I had to pull over again.  A couple of minutes later a bike patroller stopped, gave me some water, made sure I was ok, and escorted me to the finish.

Crossing the finish line

Many thanks to Bike Patrol #11133, who gave me water and escorted me to the finish.  I made Silver status (under 9 hours) by less than 3 minutes thanks to him.

I was hoping to get some cool acquisition data using the GPS from the iPhone, but it didn't work out... the battery ran out before the finish and my external battery kinda malfunctioned.  Oh well.  Luckily the GoPro just barely hung on long enough to get the finish.

One lesson I learned was to keep eating and drinking!  I ate 3 Clif Bars, 3 Larabars, 2 half-bananas, 7 gels and a handful of pretzels, along with 3.5 Camelback's worth of water and it wasn't enough.  And I know that amount was way more than I had last year.

Healthy post-race meal!

The long awaited Brompton Toolkit is leaving me breathless

Wow.  Thanks to Unfold and Cycle Blog, I got to see a video shot by NYCe Wheels on the upcoming Brompton Toolkit.

Holy crap!  I think this was way beyond what any of us were expecting when Brompton announced that they were making a toolkit.  Time will tell, but it looks extremely well designed and a lot of time and care went into making things perfect.  I love that this company didn't just slap together some cheapo tools and rolled them up in some cheap canvas envelope thing and called it good enough.  I will be eagerly awaiting mine!

It's official... the Tucson Brompton Bicycle Club is here!

As I mentioned in the last post, I was thinking about starting a Brompton group at Meetup.com.  There are two other Brompton meetup groups... one in Washington, D.C. and the other in Edinburgh UK.  The one I am organizing will of course be based in Tucson, but I hope to perhaps get members from all throughout Arizona and maybe beyond!

I'm thinking about organizing events for Brompton owners (and those curious) to hang out, take rides, maybe even do some trips!

Here is the link to the Tucson Brompton Bicycle Club! (Let me know if it isn't working).  Hope to meet some of the readers here sometime soon!

First kinda-sorta meetup...

Yesterday I met up with the other cool Brompton owners at Sky Bar. It was the first time we all have gotten together since the Gary Fisher ride. It was nice to see everyone again and talk about the future rides and trips they are planning.

It was mentioned that they have seen other Bromptons around town, which is exciting. I think I'm going to make the leap and form a group on meetup.com, and hopefully that'll make meeting more Tucson Brompton owners even easier! Once I get everything figured out I'll share the group info in a new post!

First $100 saved!

According to my "back of the envelope" calculations and records (visible here), I've saved my first $100 worth of petrol!  I've got a ways to go to recoup the cost of the bike, but as they say it's about the journey, not the destination.

5,000 views!

The stats from the blog says that there have been 5,000 views on this blog.  Wow, that happened way faster than I could have anticipated!  Thanks to all of you readers!  I'll do my best to try to continue improving my posts and keep this blog interesting and helpful.

BICAS Build-A-Bike Workshop

Earlier this month I took a Build-A-Bike workshop at BICAS where you take a donated bicycle and re-condition it with new grease and parts and adjust everything for optimal operation.  The class was divided into 5 days that ran about 4 hours each day.  The following topics were covered:

Day 1: Fixing flats and re-conditioning hubs
Day 2. Headsets and bottom brackets
Day 3. Brakes & wheel truing
Day 4. Drivetrain: Chains & derailleurs.
Day 5. Final details and test drive.

Our instructors Ash & Kristen were very knowledgable and patient with us while we struggled with adjusting just so, which was the most difficult part.  The class was helpful in helping us learn what each part is called and also how to determine and use the appropriate tool for each job.

My "lab partner" Jan and I worked on a Trek Multi-Sport 720, and if I remember correctly it was 62 cm, which is WAY too tall for me.  The Trek was very abused, so we didn't have to make too many adjustments to it.  There were other very different bikes that the other people in the class were working on, which was nice since we could get exposure to all the nuances of different parts (i.e. sealed bottom brackets)

Overall, I really enjoyed the class and highly recommend it to anyone who is interested in gaining knowledge of the inner workings of bicycles and the tool required to work on them.  The class was $80, but you will receive $40 in shop credit that can be used toward shop time, used parts or bikes.

Entrance to BICAS

The class workshop

My lab specimen

Cross-section of a headset

Ash teaching us about headsets

My lab partner Jan

Lupe, one of the many mascots at BICAS

Ash demonstrating wheel truing.

Wheel truer, AKA field goal posts.

Learning about drivetrains.

Jan getting the most important finger stuck in the handlebar.

Jan putting the bike through its paces.

Graduation!