ShareRoller is live on Kickstarter

ShareRoller, the electric drive motor from the previous post, is now live.  Here is the link to check it out:

https://www.kickstarter.com/projects/247419341/shareroller-first-portable-motor-for-share-bikes-a?ref=live

The kickstarter page has a video where you can check out the video of the ShareRoller.  It's kinda hard to wrap your head around this product until you see it in action.  You'll also see a lot more pictures of it on the shared bikes, the Xootr scooter, and of course a Brompton.

I asked Jeff if the Brompton adapter will cost extra.  He said they will be since each one will be 3D printed, and would probably cost about $95 unless there is demand for a lot of them.  If there is a lot of demand, he can have them made, which would make them cheaper.

ShareRoller electric motor drive

Update:  Included pictures and Kickstarter preview link.

Remember when I mentioned over the holidays that Bromfoot creator Jeff Guida had something cooking?  Well, Jeff’s finally allowing me to share what it is!  It’s ShareRoller, a portable electric friction drive system for several types of bikes, including Bromptons!  The unit resembles a very small suitcase and weighs about 6 or 7 pounds.

The ShareRoller is primarily designed for bicycles used in major metropolitan bike share programs, such as New York City’s Citibike and Washington D.C.’s Capital Bikeshare.  The bikes used by those programs are super stout and very heavy… it is hard to imagine a lighter weight person pushing one those.  I weigh around 175 lbs. and I had a tough time getting much speed on a Citibike.

The ShareRoller uses a high power drive wheel motor (such as those used in electric RC cars) to drive the front wheel.  The unit latches on to where the bike share bicycles lock onto the docking station, and the drive wheel presses against the front wheel.  The drive wheel has a hard rubber outer surface which contacts the front tire… this is less damaging to the tire compared to some sort of gritty sand-paper like surface.

For the Bromptons, Jeff designed an adapter block so that the ShareRoller can be used with your typical Brompton luggage options (C-bag, S-bag, etc.).  The adaptor block weighs about half a pound and is designed to not impede the folding of the Bromptons (Note:  it’s not certain yet whether Bromptons with dynamo hubs will be able to use the ShareRoller due to the location of the lights.  Jeff didn't have access to a dynamo hub equipped Brompton during the development of the ShareRoller.  The ShareRoller should work with the dynamo hub itself, but the light may impede installation of the adapter).  The adaptor block allows you to install the ShareRoller in about 10 seconds.  This allows you to quickly revert to your “normal” Brompton with minimal weight added… for comparison, hub-motor electric kits must be permanently installed on your front wheel and they add around 18 pounds even if it’s not in use.  Having multiple adaptor blocks allows a single ShareRoller to be used on multiple Bromptons (not simultaneously, of course).

There are two battery capacities that will be available at launch:  one will provide a 12 mile range and the other around 20 miles.  Other notable features include headlight (20 lumens) and a USB port for charging your portable devices.

Jeff graciously let me test ride a prototype when I was out in NYC.  I rode the ShareRoller both with a Brompton and a Citibike.  The application of power from the ShareRoller was very smooth and controlled from the thumb-operated throttle control.  It made the Citibike much more tolerable and the Brompton got almost scary fast.  I gotta say, it was pretty fun to use, and could be useful for pedal-assist up big hills or for just getting home when you’re super tired.

The ShareRoller will go on Kickstarter around February 28.  It certainly isn’t cheap, starting at an early supporter price of $995 on Kickstarter, but it’s a much better and much cheaper solution than other Brompton hub-motor electric kits.  Jeff runs a one-man operation, and the economy of scale just isn’t there yet for him to be able to offer it a a cheaper price.  Jeff and I are both engineers, and in talking with Jeff, I really got the sense that he would rather use higher quality parts than to try to build down to a price.  Jeff is very much a perfectionist…he’s worked hard at optimizing throttle acceleration rates to balance performance and battery life, which was difficult because his suppliers kept introducing newer batteries every few months.  The same attention to detail went into pretty much every aspect of this product.

I know a lot of hard core cyclists and very casual riders may not find this product useful, but for some this could be a very useful piece of gear to commuters.   Here are some use cases that come to mind:

• If you live in one of these metropolitan areas with compatible bike share bike (obviously).
• If the weather is really nice to ride in the morning, but brutally hot in the afternoon (this is usually the case in Arizona).
• If your route has a lot of hills.
• If you need to arrive at an appointment and would not like to be dripping with sweat.
• If you happen to be towing a lot of cargo and could use some assistance.

And here’s my own personal use case:
I’m in a city soccer league that plays at different fields around town.  I like to ride the Brompton to the closer fields (around 5 miles) because it gives my legs a good warm-up (plus all the environmental factors that goes with riding a bike in general).  I play my game, then afterwards the team usually goes to a restaurant for dinner.  I fold up my Brommie and ride in someone’s car to the restaurant so they don’t have to wait for me.  After I eat, I have to ride back home.  At this point I’m pretty tired and full, and my ride back takes super long.  The ShareRoller would really come in handy in this situation.  I’m looking forward to getting my hands on one.

Here are links to other articles about the ShareRoller (including pictures):
http://gizmodo.com/a-tiny-briefcase-that-turns-citibikes-into-electric-sco-1527113318
http://www.gizmag.com/shareroller-electrify-bicycle-share/30918/
http://www.fastcoexist.com/3026607/fund-this/this-lightweight-turbo-kit-will-turn-clunky-bikeshare-bikes-into-a-speedy-e-bike#6

And here is the Kickstarter preview link:

https://www.kickstarter.com/projects/247419341/1782517041?token=3224406b

Bromfoot 2 Folding Pedal Extender / Protector: First Impressions

In my early days with the ODB, I would inadvertently "overfold" the folding pedal and would scratch the raw lacquer finish.  This was upsetting, particularly on such a beautiful, expensive bike.

When I got Mondrian, I was determined to not let that happen again.  I recalled in an earlier post that Jeff from Bromfoot suggested using his product in order to prevent this from happening.  

Unfortunately (or fortunately depending on how you look at it), Brompton had changed the shape of the folding pedal to more closely resemble the size of the non-folding pedal and the original Bromfoot would not fit on the 2012 and later folding pedals.  The new folding pedals are about the same size as the non-folding one in the fore - aft direction, but the effective left-right width was narrower (I think it had something to do with a European law regarding lean angles, or something to that effect).

Fast forward to November 2013.  I had bought Mondrian and Jeff had recently released the Bromfoot 2 that is shaped for the newer style folding pedals.  It was go-time!  I bought mine at Portapedal.

Bromfoot 2 in package

The package consists of the Bromfoot 2, four replacement fasteners, and a 2.5mm hex key.

Each of the fasteners had threadlocker compound applied to them.

Here is a video on how to install the original Bromfoot.  The Bromfoot 2 is even easier since popping off the reflector is not required.

Folding pedal before Bromfoot 2 installation.

The reflectors are integrated... no need to pry them off.

Make sure the Bromfoot 2 is in the correct orientation.

Bromfoot 2 installed

Another view of the installed Bromfoot 2

The Bromfoot 2 plastic will be the only thing to touch the frame when the pedal is overfolded, which eliminates scratching.

I found the Bromfoot 2 to be a clever solution to a few of the shortcomings of the Brompton folding pedal.  Firstly, it'll prevent me from scratching the frame if I make a bonehead fold.  It'll also prevent scratching during transport (like flying in a case or gate checked).  Secondly, I did notice that I was far less conscious of the placement of my left foot when riding.  Before the Bromfoot 2, my left foot would feel out of place and I would have to re-adjust it.  Now I'm doing that less.  Thirdly, I've heard that other riders have had trouble with their heels getting caught on the small rolling wheel or Eazy Wheels (it hasn't really been a problem for me, but I could see how this could happen).  The Bromfoot can give your foot a little more clearance room.

So... initial impressions are very positive for the Bromfoot 2.  I'll keep you updated if anything changes.